By selecting Nu-Walls Inc. to construct your high-quality homes with the finest solid concrete walls, you will recognize many direct and marketing advantages.

Faster Build Time
From reinforcement, placement and inspection to setting, pouring and the final stripping and clean-up, our entire process is fast and efficient.   Two men can place and have ready for reinforcement inspection two homes per day. The forms will be delivered and placed around the job site, to maximize form setting efficiency and insure same day pour.  The stripping and site clean-up process includes 3-8 employees to remove and place the forms in baskets to be picked up and moved to the next site.  All wall ties will be broken off, and the exterior tie holes will be coated with a mastic to eliminate rust bleeding.  The site will then be cleaned of any items that were used to pour walls.  No need for a dumpster, as there will not be any items for disposal left on the jobsite.

Superior Product Strength
Solid concrete has an ultimate strength greater than block, making it better able to resist cave-ins caused by lateral pressures of wind earth and water.  Its ultimate compression strength is also greater, making it better able to support vertical compressive loads.  In addition, poured concrete walls get stronger as they age up to five years, thus reducing customer call backs due to structural issues.

Fire Resistant
Because of the increased density and joint construction, poured concrete walls offer twice the fire resistance of a hollow core block wall.

Water Resistant
Solid concrete walls are essentially impervious to the passage of water. Solid concrete walls have fewer and smaller voids than block, thus less porosity of the wall.  It offers twice the density of a hollow core wall and weighs approximately 50 pounds more per cubic foot.  This makes the wall more stable and drier.

Durability
The durability of a solid concrete wall, versus the conventional block masonry type construction, is fully appreciated with a simple hammer blow to the wall.

The ever-present effervescent properties, that are common with block products, will not occur in a solid concrete wall.  The unsightly motor lines that will eventually become visible on some block walls, are not a risk for solid concrete walls. Solid concrete walls contain 40% more concrete than hollow core block.  This equates to strength of an end product that is much greater than block can achieve even if every core in the block is filled with concrete.

Affordability
Controlling costs are one of the biggest concerns of Home Builders and buyers alike.  Efficient modern construction methods make solid poured wall cost competitive with block walls.  With this much performance at a comparable price, why look further?

Competitive Marketing Advantages
There are many reasons why you should choose to utilize Nuwalls, Inc. in your high-quality building project: 

  • Increased Structural Integrity

  • Increased Safety for the Home Owner

  • Increased Product Life

  • Decreased Maintenance Costs

  • Decreased Aesthetic Issue’s

  • Possible Reduction of Home Owner’s Insurance

  • Insect Tight

  • Energy Efficient

Lowered Maintenance Costs
Lowered maintenance costs are another way that costs will be reduced. The solid concrete wall is not as susceptible to damage due to the density and PSI of the wall, thereby reducing the number of call backs and punch list issues due at closings.

The solid poured wall will not have the mortar joints showing through the cementitious coatings over time, therefore fewer appearance issues will need to be addressed.

Concrete is resistant to rot, decay and rodents as well as fungi.  A poured wall is nontoxic, containing no preservatives to be come free upon contact or by leaching.

Increased Safety
It is a proven fact that a monolithic structure is more stable than a structure made up of many components. The entire structure is a steel reinforced concrete unit, that can be designed and produced to withstand much higher wind loads.

The Impact resistance of a solid concrete wall, far exceeds that of a hollow core wall.  

Poured Concrete Walls by Nuwalls, Inc.  -  The clear choice!

 

 

NuWalls, Inc.
7308 Gano Road
Groveland, FL 34736
352 429-0176


 

 

About Us  |  Poured Concrete Walls  |  Our Process  |  Gallery  |  Contact Us

 

This website is designed, maintained & hosted by FlaWebmaster.com , a Florida provider of specialized Internet services. No graphics, photographs or content may be used without written permission.  For more information, contact us at www.flawebmaster.com.